Outback Flatbed Kit for SCX24 Power Wagon

*** FIRST BATCH OF 25 IN STOCK ***

Aussie inspired flatbed kit for the Axial SCX24 Power Wagon.  This flat bed will bolt right up to the SCX24 Power Wagon cab using the existing screws, while retaining the tilt open capability using the included hinge mount provided with the kit.  The Outback Flatbed also sports details such as an opening drawer compartment on each side.  Also included are clear and red lenses should you decide to add 3mm LEDs.

This item is printed using PETG material for better heat resistance.  This kit requires assembly.  Additional hardware in areas not using stock hardware is provided in this kit. Tail light lenses require glue for assembly.  While it is not necessary to sand and paint this item, doing so will achieve the best looking results for your liking.

IMPORTANT NOTE: Screw pegs on the flatbed require light sanding around the circumference to smooth out roughness in order to more easily be inserted into the retainers of the SCX24 Power Wagon Cab.

Included in this kit:

1x Outback Flatbed 3D printed parts set
4x M2x4mm Cap Head Screws

Installation Video:

Installation Tips for screws:

2x M2x4mm Cap Head Screws for Rear Bumper to Flatbed
2x M2x4mm Cap Head Screws for Rear Bumper to Hinge Mount